If you’re in the auto locksmith business or just want to get your hands on a key programmer, there are many options available. One of the best choices is the Autel IM508, which combines full system diagnostics with advanced service functions.

The tool offers a variety of IMMO functions including Read Pin/CS (all keys lost), BMWCar CAS3/2 Key Learning, BenzCar FEM/BDC Key Learning/ECU Adaptation, and Remote Learning.

IMMO ECU Programming

IMMO ECU programming is a complex process which requires special tools and professional experience. Using the autel key fob programmer can make this process much easier and faster.

This application can access key chip, read, retrieve and write key information, support read PIN/CS (all key lost), key generation, key learning, remote learning, IMMO ECU Reset/Adaptation, IMMO ECU Refresh/Coding, Backup/Restore IMMO Data.

MaxiIM IM608 Pro is the most powerful all-in-one tool that combines advanced key programming and all systems diagnostics in one Android based 10.1-inch touchscreen tablet. It is equipped with XP400 key programmer and MaxiFlash ECU programmer to provide complete coverage of IMMO functions.

EEPROM/MCU Read/Write

EEPROM (Electrically Erasable Programmable Read-Only Memory) is non-volatile memory that can be reprogrammed electrically. It's most commonly used in microcontrollers that need to store small amounts of data and retrieve it later.

Unlike RAM, EEPROM is not erased by powering off the chip. This makes it a good choice for devices that need to remember data after a reset or power down condition, such as a password-protected money locker.

Unlike flash memory, EEPROM is programmed and erased in blocks of one byte at a time. This allows it to be very fast, but at the cost of a limited number of write cycles. Despite these drawbacks, EEPROM is still widely used in electronics and is found in many popular applications.

IMMO ECU Adaptation

Autel IMMO ECU Adaptation is a powerful feature of the Autel IMMO key fob programmer that allows you to program new keys for your vehicle. The IMMO ECU Adaptation process is designed to make the new key compatible with your car’s immobilizer system.

MaxiIM IM608Pro includes all-in-one key programming, diagnostics, service and anti-theft functions. It also provides OE level diagnostics for more than 80 US, European and Asian vehicle makes and models.

XP200 key programmer can read and write EEPROM/MCU data to help prevent your vehicle from being stolen. Smart Mode and Expert Mode provide helpful guide systems that can simplify the process.

This high-end IMMO and key programming tool bundle (updated from IM508/IM608) integrates the XP400 Pro and MaxiFlash JVCI ECU programmer to give you top-level IMMO and key fob programming capabilities along with 22+ most useful service functions. Autel maxisys is great too.

IMMO ECU Reset/Fit

IMMO ECU Reset/Fit is a service function that allows a technician to reset the vehicle’s transponder ECU and restore key chip data, or to fit new keys to the ignition switch. This is useful for vehicles where a key has been lost or stolen, and it can be performed with a key fob programmer.

MaxiIM IM508 (with XP200) is an affordable and easy-to-use key programmer that can perform all types of IMMO functions. Among the many special functions offered, this unit can read PIN/CS (all keys lost), EEPROM/MCU read & write, and IC card read/write.

It also comes with a range of regular maintenance services such as Oil Reset, SAS Calibration, TPMS Sensors ID Relearn, and BMS. These are very important and helpful maintenance services that can help you keep your vehicle safe and running efficiently.

IMMO Key Learning

IMMO Key Learning is the ability to learn new keys from a vehicle's smart key. This function is available on many Autel products and can be used by amateurs or professionals.

Using this function you can add new smart keys to lost keys in VW/Audi/Skoda/Seat IMMO III/IV/V, Benz FEM/BDC, BMW CAS4/3/2 key and even Volkswagen & Audi MQB (VDD & JCI).

This feature is useful for any automotive locksmith or shop that needs to do IMMO programming on vehicles. This can help reduce costs and improve efficiency. This is especially important for auto locksmiths that often need to do a large amount of work. IMMO Key Learning is easy and fast to use.Â