Autel MaxiCOM MK808z 2022 Version: New Defination of "Cost-Worthy"
Autel MaxiCOM MK808z is the most cost-worthy Autel scanner up to date, integrates Bi-directional Control, Complete Special Functions, 28+ Services, All system Diagnostics, Digital Inspection, Auto Auth, IMMO Functions, Battery Registration and Reset and etc. Along with intuitive user interface & ultra-portability, MK808 is the perfect companion for DIYers & reparir workshop.
Bi-Directional Control: Same As MP808/MP808K/MP808BT !
With the coming up of new software version V2.62 released on 2022 June 1, Autel MK808z now support “Active test” (BI-Directional Control) on various module actuators for more instant & accurate diagnosis, which is now in the same level as MP808/MP808K/MP808BT, but cost you 300 bucks less.
AutoAuth Access: Bypass SGM in FCA Vehicles
Autel MaxiCOM MK808z allow direct access to the security gateway module on 2017 and later Fiat Chrysler vehicles, so that the diagnostic tool can perform easier full diagnostics, run bi-directional active tests, actuations, relearns or even IMMO key programming (pulls PIN & write), ADAS calibration assistance etc.
Digital Inspection: Work with MV108
The Digital Inspection application configures the MaxiSys Diagnostics Device to operate as a digital video scope by simply connecting the tablet to a Digital Inspection Camera. This function allows you to examine difficult-to-reach areas normally hidden from sight, with the ability to record digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure in a safe and quick way
Special Function :Â initial adaptation, self-learning or some auto detection function with many procedures that the vehicle is performed after maintenance or reset is done or some related component in electronic control system is replaced, such as Crankshaft Position Sensor Learn
New 7 Added Functions in BMW 4.0 Software:
transport mode, high-voltage battery, cruise calibration, air conditioning learning, rain light sensor, EGR self-learning, and FRM reset; Adds basic functions and special functions for models with 4 types of chassis including G22 and G82.
OE-level All System Diagnose
Autel MK808z auto diagnostic scanner adopts the latest VIN-based Auto VIN Technology that enables auto technicians or home mechanics to identify vehicle information, like brand, year, make, model and etc, at a single touch. As the upgrade Version of Autel MX808, Autel MaxiCOM MK808z can reach more modules and car systems to perform deeper comprehensive diagnose, such as Engine, Transmission, SRS(Airbag), ABS, TPMS, BCM, BODY, A/C, Steering, Suspension, Airbag and etc, retrieve E~CU info, get freeze frame data and graphic & text live data for accurate efficient solution.
Support 4 methods for Vehicle Identification:
- Auto VIN and Auto Scan;
- Manual VIN Input;
- Automatic Selection;
- Manual Selection.
One-stop Car Care: 36+ Maintainence & Reset Services
Autel Scanner MK808z 2022 version is the upgrade version of Maxicheck MX808, able to perform up to 28 maintenance services, include but not limited to
ABS Auto Bleed, Oil Reset, SAS Adjustment; DPF Caliberation, Throttle Relearn; Injector Coding, DPF Regeneration, service mileage reset, EPB Reset & ect.
Note:Â The above mentioned is just a small portion of all supported services and more are not listed.
Note:Â Please also know that Not All service & Special functions are universally compatible. Please send VIN number and the functions you need to us to check compatibility.
Most Commonly Used Services
ABS Auto Bleed
Autel MK808z enables technicians and home mechanics to bleed air out of the ABS module and saves you time and money paying a visit to dealership.
Injector Coding
When an injector is repaired, its operating characteristics change significantly. Therefore, it is very important to assign a new code C2i or C3i to the injector to properly reflect the performance of the repaired injector. Autel MK808 is able to do the job for your car.
Oil Reset
Whenever there is an oil change, you have to reset the engine oil system. This is because the engine oil life system is responsible for calculating when engine oil and filter should be changed. In that case, Autel MK808 diagnostic tool can help you fix oil service light quickly.
EPB Reset
If the Emergency release cable has been activated, Autel MK808 allows the EPB to be un-jammed when the vehicle has entered a state where the brakes screech when applying the Parking Brake, the rear brakes squeak or rub when the vehicle is moving or there is evidence of shoe-drag.
 
 Â
Supper Wider Vehicle Coverage & 13 languages
Wide Vehicle Coverage:
Autel OBD2 Scanner MK808z has unmatched vehicle coverage, able to supports various protocols such as ISO9141-2, ISO14230-2, ISO15765 ,K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO 11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610, GM UART UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6..
Autel MK808z diagnostic tool can work on 85+ American, European and Asian car makes and over 10000+ car models and can support some of the 2022 latest car models. For example, MK808 can support Ford F-150 2022, Ford F-650 2022, Ford F-750 2022, Dodge D2-Ram 3500 Pickup 2022,
Dodge DD-Ram 3500 Cab Chassis 2022, Dodge DF-Ram 3500 Cab Chassis 10K 2022, Dodge DJ-Ram 2500 2022, Dodge DP-Ram 4500 2022, Dodge DP-Ram 5500 2022, Dodge DS-Ram 1500 2022, Dodge DT-Ram 1500 and a lot more.
Note: Autel MK808 can not work on heavy trucks.
  
 Â
About The Languages:
Autel MK808z is designed to service global users with different language background and this is reason why it offer various language options. The default language of this device is English. It can now support up to 13 languages: English, Spanish, French, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese, Swedish, Dutch & Polish.
Note: If you need to switch to a different language, please come to us wuth device S/N (12 digits, at the back of the device, eg: VB7GL6C0576)
Specifications:
| Recommended Use | Indoor |
| Operating System | Android™ 4.4.4 |
| Processor | Cortex-A9 processor(1.6 GHz) |
| Memory | 64GB |
| Display | 7-inch LCD capacitive touchscreen with 1024x600 resolution |
| Connectivity |
Mini USB 2.0 USB 2.0 Wi-Fi Micro SD card (supports up to 32GB) |
| Sensors | Ambient light sensor for brightness auto adjust |
| Audio Input/Output |
Input: N/A Output: Beep |
| Power and Battery |
3.7 V/5000 mAh lithium-polymer battery Charges via 5 VDC power supply |
| Tested Battery Life | Around 4.5 hours of continuous use |
| Battery Charging Input | 5V/1.5A |
| Power Consumption | 500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V |
| Operating Temp | 0 to 55°C(14 to 131°F) |
| Storage Temp | -20 to 60°C (-4 to 140°F) |
| Operating Humidity | 5%-95%non-condensing |
| Dimensions(WXHX D) | 237.8 mm (9.4”) x 148.6 mm (5.9”) x 35.5 mm (1.4”) |
| Net Weight | 788 g (2.42 lb.) |
| Supported Automotive Protocols | ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN,fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 |
Â
